阿里云仓库同步

.gitea/workflows/aliyun-repo-sync.yml

@@ -0,0 +1,84 @@
+name: 阿里云仓库同步流水线
+
+on:
+  push:
+    branches:
+      - master
+    paths:
+      - 'aliyun_repos.yaml'
+      - '.gitea/workflows/aliyun-repo-sync.yml'
+  workflow_dispatch:
+  schedule:
+    # 每天凌晨2点执行
+    - cron: '0 2 * * 0'
+
+env:
+  CONFIG_FILE: 'aliyun_repos.yaml'
+
+jobs:
+  sync-repositories:
+    runs-on: ubuntu-latest
+
+    steps:
+    - name: 签出配置仓库
+      uses: actions/checkout@v4
+      with:
+        fetch-depth: 1
+
+    - name: 配置 Git
+      run: |
+        git config --global user.name "gitea-runner"
+        git config --global user.email "actions@gitea.fjy8018.top"
+        git config --global init.defaultBranch master
+
+    - name: 安装依赖
+      run: |
+        apt-get update
+        apt-get install -y python3-yaml jq
+
+    - name: 验证配置文件
+      run: |
+        if [ ! -f "${{ env.CONFIG_FILE }}" ]; then
+          echo "错误: 配置文件 ${{ env.CONFIG_FILE }} 不存在!"
+          exit 1
+        fi
+        echo "✓ 配置文件已找到"
+
+    - name: 网络连通性诊断
+      run: |
+        echo "================================================================================"
+        echo "网络连通性诊断"
+        echo "================================================================================"
+        echo ""
+        echo "[1] 检查DNS解析 (center.javablade.com):"
+        if command -v nslookup >/dev/null 2>&1; then
+          nslookup center.javablade.com || echo "❌ nslookup 失败"
+        elif command -v dig >/dev/null 2>&1; then
+          dig center.javablade.com || echo "❌ dig 失败"
+        else
+          getent hosts center.javablade.com || echo "❌ DNS 解析失败"
+        fi
+        echo ""
+        echo "[2] 检查网络连通性:"
+        if command -v ping >/dev/null 2>&1; then
+          ping -c 3 -W 5 center.javablade.com || echo "❌ ping 失败"
+        else
+          echo "⚠️  ping 命令不可用，跳过连通性测试"
+        fi
+        echo ""
+        echo "[3] 检查是否可以访问上游仓库（匿名测试）:"
+        if command -v git >/dev/null 2>&1; then
+          timeout 30 git ls-remote https://center.javablade.com/blade/aliyun-Tool.git HEAD || echo "❌ 无法访问仓库"
+        else
+          echo "⚠️  git 命令不可用"
+        fi
+        echo ""
+        echo "================================================================================"
+
+    - name: 从配置文件中提取仓库并同步
+      env:
+        UPSTREAM_USERNAME: ${{ secrets.UPSTREAM_USERNAME }}
+        UPSTREAM_TOKEN: ${{ secrets.UPSTREAM_TOKEN }}
+        TARGET_USERNAME: ${{ secrets.TARGET_USERNAME }}
+        TARGET_TOKEN: ${{ secrets.TARGET_TOKEN }}
+      run: python3 sync_repos.py

.gitea/workflows/bladex-repo-sync.yml

@@ -1,19 +1,19 @@
-name: 多仓库同步流水线
+name: BladeX仓库同步流水线
 
 on:
   push:
     branches:
       - master
     paths:
-      - 'repos.yaml'
+      - 'bladex_repos.yaml'
-      - '.gitea/workflows/*.yml'
+      - '.gitea/workflows/bladex-repo-sync.yml'
   workflow_dispatch:
   schedule:
     # 每天凌晨1点执行
-    - cron: '0 1 * * *'
+    - cron: '0 1 * * 0'
 
 env:
-  CONFIG_FILE: 'repos.yaml'
+  CONFIG_FILE: 'bladex_repos.yaml'
 
 jobs:
   sync-repositories:

aliyun_repos.yaml

@@ -0,0 +1,7 @@
+# 多仓库同步配置文件
+# 定义需要同步的仓库对，源仓库 -> 目标仓库
+repositories:
+  - name: "pve-k3s-gitops"
+    source_url: "https://${CODEUP_USERNAME}:${CODEUP_PASSWORD}@codeup.aliyun.com/619ddf2bcfe94d7ade4c41ab/fjy8018/pve-k3s-gitops.git"
+    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/fjy8018/pve-k3s-gitops.git"
+    branch: "master"

bladex_repos.yaml

@@ -0,0 +1,35 @@
+# 多仓库同步配置文件
+# 定义需要同步的仓库对，源仓库 -> 目标仓库
+repositories:
+  - name: "bladex-tool"
+    source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@center.javablade.com/blade/BladeX-Tool.git"
+    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/BladeX/BladeX-Tool.git"
+    branch: "master"
+  - name: "BladeX-Safety"
+    source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@center.javablade.com/blade/BladeX-Safety.git"
+    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/BladeX/BladeX-Safety.git"
+    branch: "master"
+  - name: "bladex"
+    source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@center.javablade.com/blade/BladeX.git"
+    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/BladeX/BladeX.git"
+    branch: "master"
+  - name: "BladeX-Doc"
+    source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@center.javablade.com/blade/BladeX-Doc.git"
+    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/BladeX/BladeX-Doc.git"
+    branch: "master"
+  - name: "BladeX-Boot"
+    source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@center.javablade.com/blade/BladeX-Boot.git"
+    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/BladeX/BladeX-Boot.git"
+    branch: "master"
+  - name: "Saber"
+    source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@center.javablade.com/blade/Saber.git"
+    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/BladeX/Saber.git"
+    branch: "master"
+  - name: "BladeX-Biz"
+    source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@center.javablade.com/blade/BladeX-Biz.git"
+    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/BladeX/BladeX-Biz.git"
+    branch: "master"
+  - name: "Saber3"
+    source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@center.javablade.com/blade/Saber3.git"
+    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/BladeX/Saber3.git"
+    branch: "master"

repos.yaml

@@ -1,16 +0,0 @@
-# 多仓库同步配置文件
-# 定义需要同步的仓库对，源仓库 -> 目标仓库
-repositories:
-  # 示例：同步 BladeX-Tool 仓库
-  - name: "bladex-tool"  # 仓库名称（用于日志输出）
-    source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@center.javablade.com/blade/BladeX-Tool.git"
-    target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/BladeX/BladeX-Tool.git"
-    branch: "master"      # 要同步的分支
-
-  # 示例：同步另一个仓库（取消注释并修改以下配置）
-  # - name: "another-repo"
-  #   source_url: "https://${UPSTREAM_USERNAME}:${UPSTREAM_TOKEN}@github.com/example/repo.git"
-  #   target_url: "https://${TARGET_USERNAME}:${TARGET_TOKEN}@gitea.fjy8018.top/home/repo.git"
-  #   branch: "main"
-
-  # 添加更多仓库同步配置...

sync_repos.py

@@ -88,7 +88,7 @@ def sync_repository(repo_config):
         print(f"\n[1/6] 克隆目标仓库...")
         result = subprocess.run(
             ['git', 'clone', target_url, work_dir],
-            capture_output=True, text=True, timeout=300
+            capture_output=True, text=True, timeout=3600
         )
         if result.returncode != 0:
             print(f"❌ 克隆目标仓库失败:")
@@ -112,7 +112,7 @@ def sync_repository(repo_config):
             try:
                 result = subprocess.run(
                     ['git', 'fetch', 'upstream'],
-                    capture_output=True, text=True, timeout=200
+                    capture_output=True, text=True, timeout=3600
                 )
                 if result.returncode == 0:
                     break
@@ -166,7 +166,7 @@ def sync_repository(repo_config):
         print(f"[6/6] 推送到目标仓库...")
         result = subprocess.run(
             ['git', 'push', '--force', '--tags', 'origin', f'refs/heads/{branch}'],
-            capture_output=True, text=True, timeout=600
+            capture_output=True, text=True, timeout=3600
         )
         if result.returncode != 0:
             print(f"❌ 推送到目标仓库失败:")