mirror of
https://github.com/fscarmen/sing-box.git
synced 2026-08-10 17:55:16 +08:00
v1.2.4 Add hysteria2 port hopping.
This commit is contained in:
fscarmen
@@ -19,6 +19,8 @@
|
||||
|
||||
* * *
|
||||
## 1.更新信息
|
||||
2024.05.09 v1.2.4 Add hysteria2 port hopping. Supported Clients: ShadowRocket / NekoBox / Clash; 添加 hysteria2 的跳跃端口，支持客户端: ShadowRocket / NekoBox / Clash
|
||||
|
||||
2024.05.06 v1.2.3 Automatically detects native IPv4 and IPv6 for warp-installed machines to minimize interference with warp ip; 对于已安装 warp 机器，自动识别原生的 IPv4 和 IPv6，以减少受 warp ip 的干扰
|
||||
|
||||
2024.05.03 v1.2.2 Complete 8 non-interactive installation modes, direct output results. Suitable for mass installation scenarios. You can put the commands in the favorites of the ssh software. Please refer to the README.md description for details. 完善8种无交互安装模式，直接输出结果，适合大量装机的情景，可以把命令放在 ssh 软件的收藏夹，详细请参考README.md 说明
|
||||
@@ -139,7 +141,8 @@ bash <(wget -qO- https://raw.githubusercontent.com/fscarmen/sing-box/main/sing-b
|
||||
--VLESS_HOST_DOMAIN vless.test.com \
|
||||
--UUID_CONFIRM 20f7fca4-86e5-4ddf-9eed-24142073d197 \
|
||||
--SUBSCRIBE=true \
|
||||
--NODE_NAME_CONFIRM bundle
|
||||
--PORT_HOPPING_RANGE 50000:51000 \
|
||||
--NODE_NAME_CONFIRM bucket
|
||||
```
|
||||
|
||||
</details>
|
||||
@@ -159,7 +162,8 @@ bash <(wget -qO- https://raw.githubusercontent.com/fscarmen/sing-box/main/sing-b
|
||||
--VMESS_HOST_DOMAIN vmess.test.com \
|
||||
--VLESS_HOST_DOMAIN vless.test.com \
|
||||
--UUID_CONFIRM 20f7fca4-86e5-4ddf-9eed-24142073d197 \
|
||||
--NODE_NAME_CONFIRM bundle
|
||||
--PORT_HOPPING_RANGE 50000:51000 \
|
||||
--NODE_NAME_CONFIRM bucket
|
||||
```
|
||||
</details>
|
||||
|
||||
@@ -178,7 +182,8 @@ bash <(wget -qO- https://raw.githubusercontent.com/fscarmen/sing-box/main/sing-b
|
||||
--UUID_CONFIRM 20f7fca4-86e5-4ddf-9eed-24142073d197 \
|
||||
--SUBSCRIBE=true \
|
||||
--ARGO=true \
|
||||
--NODE_NAME_CONFIRM bundle
|
||||
--PORT_HOPPING_RANGE 50000:51000 \
|
||||
--NODE_NAME_CONFIRM bucket
|
||||
```
|
||||
</details>
|
||||
|
||||
@@ -196,7 +201,8 @@ bash <(wget -qO- https://raw.githubusercontent.com/fscarmen/sing-box/main/sing-b
|
||||
--CDN dash.cloudflare.com \
|
||||
--UUID_CONFIRM 20f7fca4-86e5-4ddf-9eed-24142073d197 \
|
||||
--ARGO=true \
|
||||
--NODE_NAME_CONFIRM bundle
|
||||
--PORT_HOPPING_RANGE 50000:51000 \
|
||||
--NODE_NAME_CONFIRM bucket
|
||||
```
|
||||
</details>
|
||||
|
||||
@@ -217,7 +223,8 @@ bash <(wget -qO- https://raw.githubusercontent.com/fscarmen/sing-box/main/sing-b
|
||||
--ARGO=true \
|
||||
--ARGO_DOMAIN=sb.argo.com \
|
||||
--ARGO_AUTH='{"AccountTag":"9cc9e3e4d8f29d2a02e297f14f20513a","TunnelSecret":"6AYfKBOoNlPiTAuWg64ZwujsNuERpWLm6pPJ2qpN8PM=","TunnelID":"1ac55430-f4dc-47d5-a850-bdce824c4101"}' \
|
||||
--NODE_NAME_CONFIRM bundle
|
||||
--PORT_HOPPING_RANGE 50000:51000 \
|
||||
--NODE_NAME_CONFIRM bucket
|
||||
```
|
||||
</details>
|
||||
|
||||
@@ -237,7 +244,8 @@ bash <(wget -qO- https://raw.githubusercontent.com/fscarmen/sing-box/main/sing-b
|
||||
--ARGO=true \
|
||||
--ARGO_DOMAIN=sb.argo.com \
|
||||
--ARGO_AUTH='{"AccountTag":"9cc9e3e4d8f29d2a02e297f14f20513a","TunnelSecret":"6AYfKBOoNlPiTAuWg64ZwujsNuERpWLm6pPJ2qpN8PM=","TunnelID":"1ac55430-f4dc-47d5-a850-bdce824c4101"}' \
|
||||
--NODE_NAME_CONFIRM bundle
|
||||
--PORT_HOPPING_RANGE 50000:51000 \
|
||||
--NODE_NAME_CONFIRM bucket
|
||||
```
|
||||
</details>
|
||||
|
||||
@@ -258,7 +266,8 @@ bash <(wget -qO- https://raw.githubusercontent.com/fscarmen/sing-box/main/sing-b
|
||||
--ARGO=true \
|
||||
--ARGO_DOMAIN=sb.argo.com \
|
||||
--ARGO_AUTH='sudo cloudflared service install eyJhIjoiOWNjOWUzZTRkOGYyOWQyYTAyZTI5N2YxNGYyMDUxM2EiLCJ0IjoiOGNiZDA4ZjItNGM0MC00OGY1LTlmZDYtZjlmMWQ0YTcxMjUyIiwicyI6IllXWTFORGN4TW1ZdE5HTXdZUzAwT0RaakxUbGxNMkl0Wm1VMk5URTFOR0l4TkdKayJ9' \
|
||||
--NODE_NAME_CONFIRM bundle
|
||||
--PORT_HOPPING_RANGE 50000:51000 \
|
||||
--NODE_NAME_CONFIRM bucket
|
||||
```
|
||||
</details>
|
||||
|
||||
@@ -278,7 +287,8 @@ bash <(wget -qO- https://raw.githubusercontent.com/fscarmen/sing-box/main/sing-b
|
||||
--ARGO=true \
|
||||
--ARGO_DOMAIN=sb.argo.com \
|
||||
--ARGO_AUTH='sudo cloudflared service install eyJhIjoiOWNjOWUzZTRkOGYyOWQyYTAyZTI5N2YxNGYyMDUxM2EiLCJ0IjoiOGNiZDA4ZjItNGM0MC00OGY1LTlmZDYtZjlmMWQ0YTcxMjUyIiwicyI6IllXWTFORGN4TW1ZdE5HTXdZUzAwT0RaakxUbGxNMkl0Wm1VMk5URTFOR0l4TkdKayJ9' \
|
||||
--NODE_NAME_CONFIRM bundle
|
||||
--PORT_HOPPING_RANGE 50000:51000 \
|
||||
--NODE_NAME_CONFIRM bucket
|
||||
```
|
||||
</details>
|
||||
|
||||
@@ -298,6 +308,7 @@ bash <(wget -qO- https://raw.githubusercontent.com/fscarmen/sing-box/main/sing-b
|
||||
| --ARGO | 是否使用 Argo Tunnel，如果是填 true，如果使用 Origin rules，则可以忽略本 Key |
|
||||
| --ARGO_DOMAIN | 固定 Argo 域名，即是 Json 或者 Token 隧道的域名 |
|
||||
| --ARGO_AUTH | Json 或者 Token 隧道的内容 |
|
||||
| --PORT_HOPPING_RANGE | hysteria2 跳跃端口范围，如 50000:51000 |
|
||||
| --NODE_NAME_CONFIRM | 节点名 |
|
||||
|
||||
|
||||
|
||||
@@ -11,4 +11,5 @@ UUID_CONFIRM=
|
||||
ARGO=
|
||||
ARGO_DOMAIN=
|
||||
ARGO_AUTH=
|
||||
PORT_HOPPING_RANGE=
|
||||
NODE_NAME_CONFIRM=
|
||||
+223
-39
@@ -1,7 +1,7 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
# 当前脚本版本号
|
||||
VERSION='v1.2.3 (2024.05.06)'
|
||||
VERSION='v1.2.4 (2024.05.09)'
|
||||
|
||||
# 各变量默认值
|
||||
GH_PROXY=''
|
||||
@@ -10,6 +10,8 @@ WORK_DIR='/etc/sing-box'
|
||||
START_PORT_DEFAULT='8881'
|
||||
MIN_PORT=100
|
||||
MAX_PORT=65520
|
||||
MIN_HOPPING_PORT=10000
|
||||
MAX_HOPPING_PORT=65535
|
||||
TLS_SERVER_DEFAULT=addons.mozilla.org
|
||||
PROTOCOL_LIST=("XTLS + reality" "hysteria2" "tuic" "ShadowTLS" "shadowsocks" "trojan" "vmess + ws" "vless + ws + tls" "H2 + reality" "gRPC + reality")
|
||||
NODE_TAG=("xtls-reality" "hysteria2" "tuic" "ShadowTLS" "shadowsocks" "trojan" "vmess-ws" "vless-ws-tls" "h2-reality" "grpc-reality")
|
||||
@@ -23,8 +25,8 @@ mkdir -p $TEMP_DIR
|
||||
|
||||
E[0]="Language:\n 1. English (default) \n 2. 简体中文"
|
||||
C[0]="${E[0]}"
|
||||
E[1]="Automatically detects native IPv4 and IPv6 for warp-installed machines to minimize interference with warp ip."
|
||||
C[1]="对于已安装 warp 机器，自动识别原生的 IPv4 和 IPv6，以减少受 warp ip 的干扰"
|
||||
E[1]="Add hysteria2 port hopping. Supported Clients: ShadowRocket / NekoBox / Clash"
|
||||
C[1]="添加 hysteria2 的跳跃端口，支持客户端: ShadowRocket / NekoBox / Clash"
|
||||
E[2]="Downloading Sing-box. Please wait a seconds ..."
|
||||
C[2]="下载 Sing-box 中，请稍等 ..."
|
||||
E[3]="Input errors up to 5 times.The script is aborted."
|
||||
@@ -48,7 +50,7 @@ C[11]="\(2/6\) 请输入开始的端口号，必须是 \${MIN_PORT} - \${MAX_POR
|
||||
E[12]="\(5/6\) Please enter UUID \(Default is \${UUID_DEFAULT}\):"
|
||||
C[12]="\(5/6\) 请输入 UUID \(默认为 \${UUID_DEFAULT}\):"
|
||||
E[13]="\(6/6\) Please enter the node name. \(Default is \${NODE_NAME_DEFAULT}\):"
|
||||
C[13]="\(6/6\) 请输入节点名称 \(默认为 \${NODE_NAME_DEFAULT}\):"
|
||||
C[13]="\(6/6\) 请输入节点名称 \(默认为: \${NODE_NAME_DEFAULT}\):"
|
||||
E[14]="Node name only allow uppercase and lowercase letters and numeric characters, please re-enter \(\${a} times remaining\):"
|
||||
C[14]="节点名称只允许英文大小写及数字字符，请重新输入 \(剩余\${a}次\):"
|
||||
E[15]="Sing-box script has not been installed yet."
|
||||
@@ -119,8 +121,8 @@ E[47]="No server ip, script exits. Feedback:[https://github.com/fscarmen/sing-bo
|
||||
C[47]="没有 server ip，脚本退出，问题反馈:[https://github.com/fscarmen/sing-box/issues]"
|
||||
E[48]="ShadowTLS - Copy the above two Neko links and manually set up the chained proxies in order. Tutorial: https://github.com/fscarmen/sing-box/blob/main/README.md#sekobox-%E8%AE%BE%E7%BD%AE-shadowtls-%E6%96%B9%E6%B3%95"
|
||||
C[48]="ShadowTLS - 复制上面两条 Neko links 进去，并按顺序手动设置链式代理，详细教程: https://github.com/fscarmen/sing-box/blob/main/README.md#sekobox-%E8%AE%BE%E7%BD%AE-shadowtls-%E6%96%B9%E6%B3%95"
|
||||
E[49]="(1/6) Select more protocols to install (e.g. hgbd):\n a. all (default)"
|
||||
C[49]="(1/6) 多选需要安装协议(比如 hgbd):\n a. all (默认)"
|
||||
E[49]="(1/6) Select more protocols to install (e.g. hgbd). The order of the port numbers of the protocols is related to the ordering of the multiple choices:\n a. all (default)"
|
||||
C[49]="(1/6) 多选需要安装协议(比如 hgbd)，协议的端口号次序与多选的排序有关:\n a. all (默认)"
|
||||
E[50]="Please enter the \$TYPE domain name:"
|
||||
C[50]="请输入 \$TYPE 域名:"
|
||||
E[51]="Please choose or custom a cdn, http support is required:"
|
||||
@@ -211,6 +213,14 @@ E[93]="Can't get the temporary tunnel domain, script exits. Feedback:[https://gi
|
||||
C[93]="获取不到临时隧道的域名，脚本退出，问题反馈:[https://github.com/fscarmen/sing-box/issues]"
|
||||
E[94]="Please bind \[\${ARGO_DOMAIN}] tunnel TYPE to HTTP and URL to \[\localhost:\${PORT_NGINX}] in Cloudflare."
|
||||
C[94]="请在 Cloudflare 绑定 \[\${ARGO_DOMAIN}] 隧道 TYPE 为 HTTP，URL 为 \[\localhost:\${PORT_NGINX}]"
|
||||
E[95]="netfilter-persistent installation failed, but the installation progress will not stop. portHopping forwarding rules are temporary rules, reboot may be invalidated."
|
||||
C[95]="netfilter-persistent安装失败,但安装进度不会停止。PortHopping转发规则为临时规则,重启可能失效"
|
||||
E[96]="netfilter-persistent is not started, PortHopping forwarding rules cannot be persisted. Reboot the system, the rules will be invalidated, please manually execute [netfilter-persistent save], continue the script does not affect the subsequent configuration."
|
||||
C[96]="netfilter-persistent未启动，PortHopping转发规则无法持久化，重启系统，规则将会失效，请手动执行 [netfilter-persistent save],继续运行脚本不影响后续配置"
|
||||
E[97]="Port Hopping/Multiple Ports (Port Hopping) function needs to occupy multiple ports, please make sure that these ports are not listening to other services \n Tip1: The number of ports should not be too many, the recommended number is about 1000, the minimum value: $MIN_HOPPING_PORT, the maximum value: $MAX_HOPPING_PORT.\n Tip2: nat machines have a limited number of ports to listen on, usually 20-30. If setting ports out of the nat range will cause the node to not work, please use with caution!\n This function is not used by default."
|
||||
C[97]="端口跳跃/多端口(Port Hopping)功能需要占用多个端口，请保证这些端口没有监听其他服务\n Tip1: 端口选择数量不宜过多，推荐1000个左右，最小值:$MIN_HOPPING_PORT，最大值: $MAX_HOPPING_PORT\n Tip2: nat 鸡由于可用于监听的端口有限，一般为20-30个。如设置了不开放的端口会导致节点不通，请慎用！\n 默认不使用该功能"
|
||||
E[98]="Enter the port range, e.g. 50000:51000. Leave blank to disable:"
|
||||
C[98]="请输入端口范围，例如 50000:51000，如要禁用请留空:"
|
||||
|
||||
# 自定义字体彩色，read 函数
|
||||
warning() { echo -e "\033[31m\033[01m$*\033[0m"; } # 红色
|
||||
@@ -308,6 +318,35 @@ input_nginx_port() {
|
||||
done
|
||||
}
|
||||
|
||||
# 输入 hysteria2 跳跃端口
|
||||
input_hopping_port() {
|
||||
local HOPPING_ERROR_TIME=6
|
||||
until [ -n "$IS_HOPPING" ]; do
|
||||
(( HOPPING_ERROR_TIME-- )) || true
|
||||
case "$HOPPING_ERROR_TIME" in
|
||||
0 )
|
||||
error "\n $(text 3) \n"
|
||||
;;
|
||||
5 )
|
||||
hint "\n $(text 97) \n" && reading " $(text 98) " PORT_HOPPING_RANGE
|
||||
;;
|
||||
* )
|
||||
reading " $(text 98) " PORT_HOPPING_RANGE
|
||||
esac
|
||||
if [[ "${PORT_HOPPING_RANGE//-/:}" =~ ^[1-6][0-9]{4}:[1-6][0-9]{4}$ ]]; then
|
||||
# 为防止输入错误，把 - 改为 : ，比如 10000-11000 改为 10000:11000
|
||||
PORT_HOPPING_RANGE=${PORT_HOPPING_RANGE//-/:}
|
||||
PORT_HOPPING_START=${PORT_HOPPING_RANGE%:*}
|
||||
PORT_HOPPING_END=${PORT_HOPPING_RANGE#*:}
|
||||
[[ "$PORT_HOPPING_START" < "$PORT_HOPPING_END" && "$PORT_HOPPING_START" -ge "$MIN_HOPPING_PORT" && "$PORT_HOPPING_END" -le "$MAX_HOPPING_PORT" ]] && IS_HOPPING=is_hopping || warning "\n $(text 36) "
|
||||
elif [[ -z "$PORT_HOPPING_RANGE" || "${PORT_HOPPING_RANGE,,}" =~ ^(n|no)$ ]]; then
|
||||
IS_HOPPING=no_hoppinng
|
||||
else
|
||||
warning "\n $(text 36) "
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
# 输入 Argo 域名和认证信息
|
||||
input_argo_auth() {
|
||||
local IS_CHANGE_ARGO=$1
|
||||
@@ -433,6 +472,10 @@ check_arch() {
|
||||
# 查安装及运行状态，下标0: sing-box，下标1: argo，下标2：docker；状态码: 26 未安装， 27 已安装未运行， 28 运行中
|
||||
check_install() {
|
||||
[[ "$IS_SUB" = 'is_sub' || -s $WORK_DIR/subscribe/qr ]] && IS_SUB=is_sub || IS_SUB=no_sub
|
||||
if ls $WORK_DIR/conf/*${NODE_TAG[1]}_inbounds.json >/dev/null 2>&1; then
|
||||
check_port_hopping_nat
|
||||
[ -n "$PORT_HOPPING_END" ] && IS_HOPPING=is_hopping || IS_HOPPING=no_hopping
|
||||
fi
|
||||
STATUS[0]=$(text 26) && [ -s /etc/systemd/system/sing-box.service ] && STATUS[0]=$(text 27) && [ "$(systemctl is-active sing-box)" = 'active' ] && STATUS[0]=$(text 28)
|
||||
if [ "${STATUS[0]}" = "$(text 26)" ] && [ ! -s $WORK_DIR/sing-box ]; then
|
||||
{
|
||||
@@ -469,7 +512,8 @@ check_sing-box_status() {
|
||||
error "\n Sing-box $(text 28) $(text 38) \n"
|
||||
;;
|
||||
"$(text 27)" )
|
||||
cmd_systemctl enable sing-box && info "\n Sing-box $(text 28) $(text 37) \n" || error "\n Sing-box $(text 28) $(text 38) \n"
|
||||
cmd_systemctl enable sing-box
|
||||
[ "$(systemctl is-active sing-box)" = 'active' ] && info "\n Sing-box $(text 28) $(text 37) \n" || error "\n Sing-box $(text 28) $(text 38) \n"
|
||||
;;
|
||||
"$(text 28)" )
|
||||
info "\n Sing-box $(text 28) $(text 37) \n"
|
||||
@@ -514,11 +558,11 @@ EOF
|
||||
elif [ "$ENABLE_DISABLE" = 'disable' ]; then
|
||||
if [ "$SYSTEM" = 'Alpine' ]; then
|
||||
systemctl stop $APP
|
||||
[ "$APP" = 'sing-box' ] && [[ "${IS_SUB}" = 'is_sub' || "${IS_ARGO}" = 'is_argo' ]] && ss -nltp | grep $(awk '/listen/{print $2; exit}' $WORK_DIR/nginx.conf) | tr ',' '\n' | awk -F '=' '/pid/{print $2}' | sort -u | xargs kill -15 >/dev/null 2>&1
|
||||
[ "$APP" = 'sing-box' ] && [[ "${IS_SUB}" = 'is_sub' || "${IS_ARGO}" = 'is_argo' ]] && [ -s $WORK_DIR/nginx.conf ] && ss -nltp | grep $(awk '/listen/{print $2; exit}' $WORK_DIR/nginx.conf) | tr ',' '\n' | awk -F '=' '/pid/{print $2}' | sort -u | xargs kill -15 >/dev/null 2>&1
|
||||
rm -f /etc/local.d/$APP.start
|
||||
elif [ "$IS_CENTOS" = 'CentOS7' ]; then
|
||||
systemctl disable --now $APP
|
||||
[ "$APP" = 'sing-box' ] && [[ "${IS_SUB}" = 'is_sub' || "${IS_ARGO}" = 'is_argo' ]] && ss -nltp | grep $(awk '/listen/{print $2; exit}' $WORK_DIR/nginx.conf) | tr ',' '\n' | awk -F '=' '/pid/{print $2}' | sort -u | xargs kill -15 >/dev/null 2>&1
|
||||
[ "$APP" = 'sing-box' ] && [[ "${IS_SUB}" = 'is_sub' || "${IS_ARGO}" = 'is_argo' ]] && [ -s $WORK_DIR/nginx.conf ] && ss -nltp | grep $(awk '/listen/{print $2; exit}' $WORK_DIR/nginx.conf) | tr ',' '\n' | awk -F '=' '/pid/{print $2}' | sort -u | xargs kill -15 >/dev/null 2>&1
|
||||
else
|
||||
systemctl disable --now $APP
|
||||
fi
|
||||
@@ -546,8 +590,8 @@ check_system_info() {
|
||||
RELEASE=("Debian" "Ubuntu" "CentOS" "Arch" "Alpine" "Fedora")
|
||||
EXCLUDE=("")
|
||||
MAJOR=("9" "16" "7" "3" "" "37")
|
||||
PACKAGE_UPDATE=("apt -y update" "apt -y update" "yum -y update" "pacman -Sy" "apk update -f" "dnf -y update")
|
||||
PACKAGE_INSTALL=("apt -y install" "apt -y install" "yum -y install" "pacman -S --noconfirm" "apk add --no-cache" "dnf -y install")
|
||||
PACKAGE_UPDATE=("apt -y update" "apt -y update" "yum -y update --skip-broken" "pacman -Sy" "apk update -f" "dnf -y update")
|
||||
PACKAGE_INSTALL=("DEBIAN_FRONTEND=noninteractive apt -y install" "DEBIAN_FRONTEND=noninteractive apt -y install" "yum -y install" "pacman -S --noconfirm" "apk add --no-cache" "dnf -y install")
|
||||
PACKAGE_UNINSTALL=("apt -y autoremove" "apt -y autoremove" "yum -y autoremove" "pacman -Rcnsu --noconfirm" "apk del -f" "dnf -y autoremove")
|
||||
|
||||
for int in "${!REGEX[@]}"; do
|
||||
@@ -567,21 +611,104 @@ check_system_info() {
|
||||
[ "$SYSTEM" = 'CentOS' ] && IS_CENTOS="CentOS$(echo "$SYS" | sed "s/[^0-9.]//g" | cut -d. -f1)"
|
||||
}
|
||||
|
||||
# 删除端口跳跃
|
||||
del_port_hopping_nat(){
|
||||
check_port_hopping_nat
|
||||
if [ "$SYSTEM" = 'Alpine' ]; then
|
||||
iptables --table nat -D PREROUTING -p udp --dport ${PORT_HOPPING_START}:${PORT_HOPPING_END} -m comment --comment "NAT ${PORT_HOPPING_START}:${PORT_HOPPING_END} to ${PORT_HOPPING_TARGET} (Sing-box Family Bucket)" -j DNAT --to-destination :${PORT_HOPPING_TARGET} 2>/dev/null
|
||||
ip6tables --table nat -D PREROUTING -p udp --dport ${PORT_HOPPING_START}:${PORT_HOPPING_END} -m comment --comment "NAT ${PORT_HOPPING_START}:${PORT_HOPPING_END} to ${PORT_HOPPING_TARGET} (Sing-box Family Bucket)" -j DNAT --to-destination :${PORT_HOPPING_TARGET} 2>/dev/null
|
||||
elif [ "$(systemctl is-active firewalld)" = 'active' ]; then
|
||||
firewall-cmd --permanent --remove-forward-port=port=${PORT_HOPPING_START}-${PORT_HOPPING_END}:proto=udp:toport=${PORT_HOPPING_TARGET} >/dev/null 2>&1
|
||||
firewall-cmd --reload >/dev/null 2>&1
|
||||
else
|
||||
iptables --table nat -D PREROUTING -p udp --dport ${PORT_HOPPING_START}:${PORT_HOPPING_END} -m comment --comment "NAT ${PORT_HOPPING_START}:${PORT_HOPPING_END} to ${PORT_HOPPING_TARGET} (Sing-box Family Bucket)" -j DNAT --to-destination :${PORT_HOPPING_TARGET} 2>/dev/null
|
||||
ip6tables --table nat -D PREROUTING -p udp --dport ${PORT_HOPPING_START}:${PORT_HOPPING_END} -m comment --comment "NAT ${PORT_HOPPING_START}:${PORT_HOPPING_END} to ${PORT_HOPPING_TARGET} (Sing-box Family Bucket)" -j DNAT --to-destination :${PORT_HOPPING_TARGET} 2>/dev/null
|
||||
[ "$(systemctl is-active netfilter-persistent)" = 'active' ] && netfilter-persistent save 2>/dev/null
|
||||
fi
|
||||
}
|
||||
|
||||
# 添加端口跳跃
|
||||
add_port_hopping_nat() {
|
||||
local PORT_HOPPING_START=$1
|
||||
local PORT_HOPPING_END=$2
|
||||
local PORT_HOPPING_TARGET=$3
|
||||
|
||||
# 检测防火墙依赖和状态
|
||||
if [ "$SYSTEM" = 'Alpine' ]; then
|
||||
# 添加防火墙规则
|
||||
iptables --table nat -A PREROUTING -p udp --dport ${PORT_HOPPING_START}:${PORT_HOPPING_END} -m comment --comment "NAT ${PORT_HOPPING_START}:${PORT_HOPPING_END} to ${PORT_HOPPING_TARGET} (Sing-box Family Bucket)" -j DNAT --to-destination :${PORT_HOPPING_TARGET} 2>/dev/null
|
||||
ip6tables --table nat -A PREROUTING -p udp --dport ${PORT_HOPPING_START}:${PORT_HOPPING_END} -m comment --comment "NAT ${PORT_HOPPING_START}:${PORT_HOPPING_END} to ${PORT_HOPPING_TARGET} (Sing-box Family Bucket)" -j DNAT --to-destination :${PORT_HOPPING_TARGET} 2>/dev/null
|
||||
|
||||
# 将 iptables, ip6tables 添加到默认运行级别
|
||||
rc-update show default | grep -q 'iptables' || rc-update add iptables >/dev/null 2>&1
|
||||
rc-update show default | grep -q 'ip6tables' || rc-update add ip6tables >/dev/null 2>&1
|
||||
rc-update show default | grep -q 'iptables' && rc-update show default | grep -q 'ip6tables' || warning "\n $(text 96) \n"
|
||||
|
||||
# 保存当前的 iptables, ip6tables 规则集，以便在开机时恢复
|
||||
rc-service iptables save >/dev/null 2>&1
|
||||
rc-service ip6tables save >/dev/null 2>&1
|
||||
|
||||
elif [ "$(systemctl is-active firewalld)" = 'active' ]; then
|
||||
if [ "$(firewall-cmd --query-masquerade --permanent)" != 'yes' ] ; then
|
||||
firewall-cmd --add-masquerade --permanent >/dev/null 2>&1
|
||||
firewall-cmd --reload >/dev/null 2>&1
|
||||
[ "$(firewall-cmd --query-masquerade --permanent)" = 'yes' ] && info "\n firewalld masquerade $(text 28) $(text 37) \n" || warning "\n firewalld masquerade $(text 28) $(text 38) \n"
|
||||
fi
|
||||
|
||||
# 添加防火墙规则
|
||||
firewall-cmd --add-forward-port=port=$PORT_HOPPING_START-$PORT_HOPPING_END:proto=udp:toport=${PORT_HOPPING_TARGET} --permanent >/dev/null 2>&1
|
||||
firewall-cmd --reload >/dev/null 2>&1
|
||||
|
||||
else
|
||||
if ! [ -x "$(type -p netfilter-persistent)" ]; then
|
||||
info "\n $(text 7) iptables-persistent"
|
||||
${PACKAGE_INSTALL[int]} iptables-persistent >/dev/null 2>&1
|
||||
fi
|
||||
[ -x "$(type -p netfilter-persistent)" ] || warning "\n $(text 95) \n"
|
||||
|
||||
# 添加防火墙规则
|
||||
iptables --table nat -A PREROUTING -p udp --dport ${PORT_HOPPING_START}:${PORT_HOPPING_END} -m comment --comment "NAT ${PORT_HOPPING_START}:${PORT_HOPPING_END} to ${PORT_HOPPING_TARGET} (Sing-box Family Bucket)" -j DNAT --to-destination :${PORT_HOPPING_TARGET} 2>/dev/null
|
||||
ip6tables --table nat -A PREROUTING -p udp --dport ${PORT_HOPPING_START}:${PORT_HOPPING_END} -m comment --comment "NAT ${PORT_HOPPING_START}:${PORT_HOPPING_END} to ${PORT_HOPPING_TARGET} (Sing-box Family Bucket)" -j DNAT --to-destination :${PORT_HOPPING_TARGET} 2>/dev/null
|
||||
|
||||
# 保存当前的 iptables, ip6tables 规则集，以便在开机时恢复
|
||||
[ "$(systemctl is-active netfilter-persistent)" != 'active' ] && warning "\n $(text 96) \n" || netfilter-persistent save 2>/dev/null
|
||||
fi
|
||||
}
|
||||
|
||||
# 查端口跳跃的 dnat 端口
|
||||
check_port_hopping_nat() {
|
||||
PORT_HOPPING_TARGET=$(awk -F [:,] '/"listen_port"/{print $2}' $WORK_DIR/conf/*${NODE_TAG[1]}_inbounds.json)
|
||||
if [ "$SYSTEM" = 'Alpine' ]; then
|
||||
[[ $(iptables --list --table nat 2>/dev/null) =~ 'Sing-box Family Bucket' ]] && PORT_HOPPING_RANGE=$(iptables --table nat -S PREROUTING 2>/dev/null | awk '/Sing-box Family Bucket/ {for (i=0; i<NF; i++) if ($i=="--dport") {print $(i+1); exit}}') && PORT_HOPPING_TARGET=$(iptables --table nat -S PREROUTING 2>/dev/null | awk '/Sing-box Family Bucket/ {for (i=0; i<NF; i++) if ($i=="to") {print $(i+1); exit}}')
|
||||
[ -n "$PORT_HOPPING_RANGE" ] && PORT_HOPPING_START=${PORT_HOPPING_RANGE%:*} && PORT_HOPPING_END=${PORT_HOPPING_RANGE#*:}
|
||||
elif [ "$(systemctl is-active firewalld)" = 'active' ]; then
|
||||
local FIREWALL_LIST=$(firewall-cmd --list-all --permanent | grep "toport=${PORT_HOPPING_TARGET}")
|
||||
[ -n "$FIREWALL_LIST" ] && PORT_HOPPING_START=$(sed "s/.* port=\([^-]\+\)-.*/\1/" <<< "$FIREWALL_LIST") &&
|
||||
PORT_HOPPING_END=$(sed "s/.* port=$PORT_HOPPING_START-\([^:]\+\):.*/\1/" <<< "$FIREWALL_LIST") &&
|
||||
PORT_HOPPING_TARGET=$(sed "s/.*toport=\([^:]\+\):.*/\1/" <<< "$FIREWALL_LIST")
|
||||
else
|
||||
[[ $(iptables --list --table nat) =~ 'Sing-box Family Bucket' ]] && PORT_HOPPING_RANGE=$(iptables --table nat -S PREROUTING | awk '/Sing-box Family Bucket/ {for (i=0; i<NF; i++) if ($i=="--dport") {print $(i+1); exit}}') && PORT_HOPPING_TARGET=$(iptables --table nat -S PREROUTING | awk '/Sing-box Family Bucket/ {for (i=0; i<NF; i++) if ($i=="to") {print $(i+1); exit}}')
|
||||
[ -n "$PORT_HOPPING_RANGE" ] && PORT_HOPPING_START=${PORT_HOPPING_RANGE%:*} && PORT_HOPPING_END=${PORT_HOPPING_RANGE#*:}
|
||||
fi
|
||||
}
|
||||
|
||||
# 检测 IPv4 IPv6 信息
|
||||
check_system_ip() {
|
||||
local DEFAULT_LOCAL_INTERFACE=$(ip route show default | awk '/default/ {for (i=0; i<NF; i++) if ($i=="dev") {print $(i+1); exit}}')
|
||||
if [ -n "$DEFAULT_LOCAL_INTERFACE" ]; then
|
||||
local DEFAULT_LOCAL_IP4=$(ip addr show $DEFAULT_LOCAL_INTERFACE | sed -n 's#.*inet \([^/]\+\)/[0-9]\+.*global.*#\1#gp')
|
||||
local DEFAULT_LOCAL_IP6=$(ip addr show $DEFAULT_LOCAL_INTERFACE | sed -n 's#.*inet6 \([^/]\+\)/[0-9]\+.*global.*#\1#gp')
|
||||
[ -n "$DEFAULT_LOCAL_IP4" ] && local BIND_ADDRESS4="--bind-address=$DEFAULT_LOCAL_IP4"
|
||||
[ -n "$DEFAULT_LOCAL_IP6" ] && local BIND_ADDRESS6="--bind-address=$DEFAULT_LOCAL_IP6"
|
||||
fi
|
||||
|
||||
[ -n "$DEFAULT_LOCAL_IP4" ] && IP4=$(wget -4 --bind-address=$DEFAULT_LOCAL_IP4 -qO- $BIND_ADDRESS4 --no-check-certificate --user-agent=Mozilla --tries=2 --timeout=1 http://ip-api.com/json/) &&
|
||||
IP4=$(wget -4 $BIND_ADDRESS4 -qO- $BIND_ADDRESS4 --no-check-certificate --user-agent=Mozilla --tries=2 --timeout=1 http://ip-api.com/json/) &&
|
||||
WAN4=$(expr "$IP4" : '.*query\":[ ]*\"\([^"]*\).*') &&
|
||||
COUNTRY4=$(expr "$IP4" : '.*country\":[ ]*\"\([^"]*\).*') &&
|
||||
ASNORG4=$(expr "$IP4" : '.*isp\":[ ]*\"\([^"]*\).*') &&
|
||||
[[ "$L" = C && -n "$COUNTRY4" ]] && COUNTRY4=$(translate "$COUNTRY4")
|
||||
|
||||
[ -n "$DEFAULT_LOCAL_IP6" ] && IP6=$(wget -6 --bind-address=$DEFAULT_LOCAL_IP6 -qO- $BIND_ADDRESS6 --no-check-certificate --user-agent=Mozilla --tries=2 --timeout=1 https://api.ip.sb/geoip) &&
|
||||
IP6=$(wget -6 $BIND_ADDRESS6 -qO- $BIND_ADDRESS6 --no-check-certificate --user-agent=Mozilla --tries=2 --timeout=1 https://api.ip.sb/geoip) &&
|
||||
WAN6=$(expr "$IP6" : '.*ip\":[ ]*\"\([^"]*\).*') &&
|
||||
COUNTRY6=$(expr "$IP6" : '.*country\":[ ]*\"\([^"]*\).*') &&
|
||||
ASNORG6=$(expr "$IP6" : '.*isp\":[ ]*\"\([^"]*\).*') &&
|
||||
@@ -674,6 +801,9 @@ sing-box_variables() {
|
||||
DOMAIN_STRATEG=prefer_ipv4
|
||||
fi
|
||||
|
||||
# 如选择有 c. hysteria2 时，选择是否使用端口跳跃
|
||||
[[ "${INSTALL_PROTOCOLS[@]}" =~ 'c' ]] && input_hopping_port
|
||||
|
||||
# 如选择有 h. vmess + ws 或 i. vless + ws 时，先检测是否有支持的 http 端口可用，如有则要求输入域名和 cdn
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ 'h' ]]; then
|
||||
if [ "$IS_ARGO" = 'is_argo' ]; then
|
||||
@@ -749,8 +879,8 @@ check_dependencies() {
|
||||
fi
|
||||
|
||||
# 检测 Linux 系统的依赖，升级库并重新安装依赖
|
||||
local DEPS_CHECK=("wget" "tar" "systemctl" "ss" "bash" "openssl")
|
||||
local DEPS_INSTALL=("wget" "tar" "systemctl" "iproute2" "bash" "openssl")
|
||||
local DEPS_CHECK=("wget" "tar" "systemctl" "ss" "bash" "openssl" "iptables" "ip6tables")
|
||||
local DEPS_INSTALL=("wget" "tar" "systemctl" "iproute2" "bash" "openssl" "iptables" "ip6tables")
|
||||
for g in "${!DEPS_CHECK[@]}"; do
|
||||
[ ! $(type -p ${DEPS_CHECK[g]}) ] && DEPS+=(${DEPS_INSTALL[g]})
|
||||
done
|
||||
@@ -811,6 +941,12 @@ check_firewall_configuration() {
|
||||
|
||||
# Nginx 配置文件
|
||||
export_nginx_conf_file() {
|
||||
# 在添加协议，需要用到 nginx 的时候，先检测是否已经安装
|
||||
if ! [ -x "$(type -p nginx)" ]; then
|
||||
info "\n $(text 7) nginx"
|
||||
${PACKAGE_INSTALL[int]} nginx >/dev/null 2>&1
|
||||
fi
|
||||
|
||||
NGINX_CONF="user root;
|
||||
worker_processes auto;
|
||||
|
||||
@@ -1130,6 +1266,7 @@ EOF
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
[ -z "$PORT_HYSTERIA2" ] && PORT_HYSTERIA2=$[START_PORT+$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")]
|
||||
[ "$IS_HOPPING" = 'is_hopping' ] && add_port_hopping_nat $PORT_HOPPING_START $PORT_HOPPING_END $PORT_HYSTERIA2
|
||||
NODE_NAME[12]=${NODE_NAME[12]:-"$NODE_NAME_CONFIRM"} && UUID[12]=${UUID[12]:-"$UUID_CONFIRM"}
|
||||
cat > $WORK_DIR/conf/12_${NODE_TAG[1]}_inbounds.json << EOF
|
||||
{
|
||||
@@ -1604,7 +1741,7 @@ fetch_nodes_value() {
|
||||
[ -s $WORK_DIR/conf/*_${NODE_TAG[0]}_inbounds.json ] && local JSON=$(cat $WORK_DIR/conf/*_${NODE_TAG[0]}_inbounds.json) && NODE_NAME[11]=$(sed -n "s/.*\"tag\":\"\(.*\) ${NODE_TAG[0]}.*/\1/p" <<< "$JSON") && PORT_XTLS_REALITY=$(sed -n 's/.*"listen_port":\([0-9]\+\),/\1/gp' <<< "$JSON") && UUID[11]=$(awk -F '"' '/"uuid"/{print $4}' <<< "$JSON") && TLS_SERVER[11]=$(awk -F '"' '/"server_name"/{print $4}' <<< "$JSON") && REALITY_PRIVATE[11]=$(awk -F '"' '/"private_key"/{print $4}' <<< "$JSON") && REALITY_PUBLIC[11]=$(awk -F '"' '/"public_key"/{print $4}' <<< "$JSON")
|
||||
|
||||
# 获取 Hysteria2 key-value
|
||||
[ -s $WORK_DIR/conf/*_${NODE_TAG[1]}_inbounds.json ] && local JSON=$(cat $WORK_DIR/conf/*_${NODE_TAG[1]}_inbounds.json) && NODE_NAME[12]=$(sed -n "s/.*\"tag\":\"\(.*\) ${NODE_TAG[1]}.*/\1/p" <<< "$JSON") && PORT_HYSTERIA2=$(sed -n 's/.*"listen_port":\([0-9]\+\),/\1/gp' <<< "$JSON") && UUID[12]=$(awk -F '"' '/"password"/{count++; if (count == 1) {print $4; exit}}' <<< "$JSON")
|
||||
[ -s $WORK_DIR/conf/*_${NODE_TAG[1]}_inbounds.json ] && local JSON=$(cat $WORK_DIR/conf/*_${NODE_TAG[1]}_inbounds.json) && NODE_NAME[12]=$(sed -n "s/.*\"tag\":\"\(.*\) ${NODE_TAG[1]}.*/\1/p" <<< "$JSON") && PORT_HYSTERIA2=$(sed -n 's/.*"listen_port":\([0-9]\+\),/\1/gp' <<< "$JSON") && UUID[12]=$(awk -F '"' '/"password"/{count++; if (count == 1) {print $4; exit}}' <<< "$JSON") && check_port_hopping_nat
|
||||
|
||||
# 获取 Tuic V5 key-value
|
||||
[ -s $WORK_DIR/conf/*_${NODE_TAG[2]}_inbounds.json ] && local JSON=$(cat $WORK_DIR/conf/*_${NODE_TAG[2]}_inbounds.json) && NODE_NAME[13]=$(sed -n "s/.*\"tag\":\"\(.*\) ${NODE_TAG[2]}.*/\1/p" <<< "$JSON") && PORT_TUIC=$(sed -n 's/.*"listen_port":\([0-9]\+\),/\1/gp' <<< "$JSON") && UUID[13]=$(awk -F '"' '/"uuid"/{print $4}' <<< "$JSON") && TUIC_PASSWORD=$(awk -F '"' '/"password"/{print $4}' <<< "$JSON") && TUIC_CONGESTION_CONTROL=$(awk -F '"' '/"congestion_control"/{print $4}' <<< "$JSON")
|
||||
@@ -1736,10 +1873,14 @@ export_list() {
|
||||
local CLASH_SUBSCRIBE+="
|
||||
$CLASH_XTLS_REALITY
|
||||
"
|
||||
[ -n "$PORT_HYSTERIA2" ] && local CLASH_HYSTERIA2="- {name: \"${NODE_NAME[12]} ${NODE_TAG[1]}\", type: hysteria2, server: ${SERVER_IP}, port: ${PORT_HYSTERIA2}, up: \"200 Mbps\", down: \"1000 Mbps\", password: ${UUID[12]}, skip-cert-verify: true}" &&
|
||||
if [ -n "$PORT_HYSTERIA2" ]; then
|
||||
[[ -n "$PORT_HOPPING_START" && -n "$PORT_HOPPING_END" ]] && local CLASH_HOPPING=" ports: ${PORT_HOPPING_START}-${PORT_HOPPING_END}, HopInterval: 60,"
|
||||
local CLASH_HYSTERIA2="- {name: \"${NODE_NAME[12]} ${NODE_TAG[1]}\", type: hysteria2, server: ${SERVER_IP}, port: ${PORT_HYSTERIA2},${CLASH_HOPPING} up: \"200 Mbps\", down: \"1000 Mbps\", password: ${UUID[12]}, skip-cert-verify: true}" &&
|
||||
local CLASH_SUBSCRIBE+="
|
||||
- {name: \"${NODE_NAME[12]} ${NODE_TAG[1]}\", type: hysteria2, server: ${SERVER_IP}, port: ${PORT_HYSTERIA2}, up: \"200 Mbps\", down: \"1000 Mbps\", password: ${UUID[12]}, skip-cert-verify: true}
|
||||
$CLASH_HYSTERIA2
|
||||
"
|
||||
fi
|
||||
|
||||
[ -n "$PORT_TUIC" ] && local CLASH_TUIC="- {name: \"${NODE_NAME[13]} ${NODE_TAG[2]}\", type: tuic, server: ${SERVER_IP}, port: ${PORT_TUIC}, uuid: ${UUID[13]}, password: ${TUIC_PASSWORD}, alpn: [h3], disable-sni: true, reduce-rtt: true, request-timeout: 8000, udp-relay-mode: native, congestion-controller: $TUIC_CONGESTION_CONTROL, skip-cert-verify: true}" &&
|
||||
local CLASH_SUBSCRIBE+="
|
||||
$CLASH_TUIC
|
||||
@@ -1826,9 +1967,13 @@ export_list() {
|
||||
[ -n "$PORT_XTLS_REALITY" ] && local SHADOWROCKET_SUBSCRIBE+="
|
||||
vless://$(echo -n "auto:${UUID[11]}@${SERVER_IP_2}:${PORT_XTLS_REALITY}" | base64 -w0)?remarks=${NODE_NAME[11]} ${NODE_TAG[0]}&obfs=none&tls=1&peer=${TLS_SERVER[11]}&mux=1&pbk=${REALITY_PUBLIC[11]}
|
||||
"
|
||||
[ -n "$PORT_HYSTERIA2" ] && local SHADOWROCKET_SUBSCRIBE+="
|
||||
hysteria2://${UUID[12]}@${SERVER_IP_2}:${PORT_HYSTERIA2}?insecure=1&obfs=none#${NODE_NAME[12]}%20${NODE_TAG[1]}
|
||||
if [ -n "$PORT_HYSTERIA2" ]; then
|
||||
[[ -n "$PORT_HOPPING_START" && -n "$PORT_HOPPING_END" ]] && local SHADOWROCKET_HOPPING="&mport=${PORT_HYSTERIA2},${PORT_HOPPING_START}-${PORT_HOPPING_END}"
|
||||
local SHADOWROCKET_SUBSCRIBE+="
|
||||
hysteria2://${UUID[12]}@${SERVER_IP_2}:${PORT_HYSTERIA2}?insecure=1&obfs=none${SHADOWROCKET_HOPPING}#${NODE_NAME[12]}%20${NODE_TAG[1]}
|
||||
"
|
||||
fi
|
||||
|
||||
[ -n "$PORT_TUIC" ] && local SHADOWROCKET_SUBSCRIBE+="
|
||||
tuic://${TUIC_PASSWORD}:${UUID[13]}@${SERVER_IP_2}:${PORT_TUIC}?congestion_control=$TUIC_CONGESTION_CONTROL&udp_relay_mode=native&alpn=h3&allow_insecure=1#${NODE_NAME[13]}%20${NODE_TAG[2]}
|
||||
"
|
||||
@@ -2018,9 +2163,12 @@ vless://${UUID[20]}@${SERVER_IP_1}:${PORT_GRPC_REALITY}?encryption=none&security
|
||||
----------------------------
|
||||
vless://${UUID[11]}@${SERVER_IP_1}:${PORT_XTLS_REALITY}?security=reality&sni=${TLS_SERVER[11]}&fp=chrome&pbk=${REALITY_PUBLIC[11]}&type=tcp&encryption=none#${NODE_NAME[11]}%20${NODE_TAG[0]}"
|
||||
|
||||
[ -n "$PORT_HYSTERIA2" ] && local NEKOBOX_SUBSCRIBE+="
|
||||
if [ -n "$PORT_HYSTERIA2" ]; then
|
||||
[[ -n "$PORT_HOPPING_START" && -n "$PORT_HOPPING_END" ]] && NEKOBOX_HOPPING="mport=${PORT_HOPPING_START}-${PORT_HOPPING_END}&"
|
||||
local NEKOBOX_SUBSCRIBE+="
|
||||
----------------------------
|
||||
hy2://${UUID[12]}@${SERVER_IP_1}:${PORT_HYSTERIA2}?insecure=1#${NODE_NAME[12]} ${NODE_TAG[1]}"
|
||||
hy2://${UUID[12]}@${SERVER_IP_1}:${PORT_HYSTERIA2}?${NEKOBOX_HOPPING}insecure=1#${NODE_NAME[12]} ${NODE_TAG[1]}"
|
||||
fi
|
||||
|
||||
[ -n "$PORT_TUIC" ] && local NEKOBOX_SUBSCRIBE+="
|
||||
----------------------------
|
||||
@@ -2441,45 +2589,56 @@ change_protocols() {
|
||||
REINSTALL_PORTS=(${KEEP_PORTS[@]} ${ADD_PORTS[@]})
|
||||
|
||||
CHECK_PROTOCOLS=b
|
||||
# 获取原始 Reality 配置信息
|
||||
# 获取 Reality 端口
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_XTLS_REALITY=${REINSTALL_PORTS[POSITION]}
|
||||
else
|
||||
unset PORT_XTLS_REALITY
|
||||
fi
|
||||
|
||||
# 获取原始 Hysteria2 配置信息
|
||||
# 获取 Hysteria2 端口
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_HYSTERIA2=${REINSTALL_PORTS[POSITION]}
|
||||
[ -z "${PORT_HOPPING_START}${PORT_HOPPING_END}" ] && input_hopping_port
|
||||
else
|
||||
unset PORT_HYSTERIA2
|
||||
fi
|
||||
|
||||
# 获取原始 Tuic V5 配置信息
|
||||
# 获取 Tuic V5 端口
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_TUIC=${REINSTALL_PORTS[POSITION]}
|
||||
else
|
||||
unset PORT_TUIC
|
||||
fi
|
||||
|
||||
# 获取原始 ShadowTLS 配置信息
|
||||
# 获取 ShadowTLS 端口
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_SHADOWTLS=${REINSTALL_PORTS[POSITION]}
|
||||
fi
|
||||
|
||||
# 获取原始 Shadowsocks 配置信息
|
||||
# 获取 Shadowsocks 端口
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_SHADOWSOCKS=${REINSTALL_PORTS[POSITION]}
|
||||
else
|
||||
unset PORT_SHADOWSOCKS
|
||||
fi
|
||||
|
||||
# 获取原始 Trojan 配置信息
|
||||
# 获取 Trojan 端口
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_TROJAN=${REINSTALL_PORTS[POSITION]}
|
||||
else
|
||||
unset PORT_TROJAN
|
||||
fi
|
||||
|
||||
# 获取 ws 的 argo 或者 origin 状态
|
||||
@@ -2492,7 +2651,7 @@ change_protocols() {
|
||||
local ARGO_ORIGIN_RULES_STATUS=no_argo_no_origin
|
||||
fi
|
||||
|
||||
# 获取原始 vmess + ws 配置信息
|
||||
# 获取 vmess + ws 配置信息
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
local DOMAIN_ERROR_TIME=5
|
||||
@@ -2504,8 +2663,10 @@ change_protocols() {
|
||||
done
|
||||
elif [ "$ARGO_ORIGIN_RULES_STATUS" = 'no_argo_no_origin' ]; then
|
||||
[ -z "$ARGO_OR_ORIGIN_RULES" ] && hint "\n $(text 57) " && reading "\n $(text 24) " ARGO_OR_ORIGIN_RULES
|
||||
[ "$ARGO_OR_ORIGIN_RULES" = '2' ] && IS_ARGO=no_argo || IS_ARGO=is_argo
|
||||
[ "$ARGO_OR_ORIGIN_RULES" != '2' ] && ARGO_OR_ORIGIN_RULES=1 && IS_ARGO=is_argo || IS_ARGO=no_argo
|
||||
if [ "$IS_ARGO" = 'is_argo' ]; then
|
||||
# 如果原来没有 nginx 配置，需要获取 nginx 端口信息
|
||||
[ -z "$PORT_NGINX" ] && input_nginx_port
|
||||
until [ -n "$ARGO_RUNS" ]; do
|
||||
input_argo_auth is_add_protocols
|
||||
[ -n "$ARGO_RUNS" ] && local ARGO_READY=argo_ready && break
|
||||
@@ -2521,9 +2682,11 @@ change_protocols() {
|
||||
fi
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_VMESS_WS=${REINSTALL_PORTS[POSITION]}
|
||||
else
|
||||
unset PORT_VMESS_WS
|
||||
fi
|
||||
|
||||
# 获取原始 vless + ws + tls 配置信息
|
||||
# 获取 vless + ws + tls 配置信息
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
local DOMAIN_ERROR_TIME=5
|
||||
@@ -2535,8 +2698,10 @@ change_protocols() {
|
||||
done
|
||||
elif [ "$ARGO_ORIGIN_RULES_STATUS" = 'no_argo_no_origin' ]; then
|
||||
[ -z "$ARGO_OR_ORIGIN_RULES" ] && hint "\n $(text 57) " && reading "\n $(text 24) " ARGO_OR_ORIGIN_RULES
|
||||
[ "$ARGO_OR_ORIGIN_RULES" = '2' ] && IS_ARGO=no_argo || IS_ARGO=is_argo
|
||||
[ "$ARGO_OR_ORIGIN_RULES" != '2' ] && ARGO_OR_ORIGIN_RULES=1 && IS_ARGO=is_argo || IS_ARGO=no_argo
|
||||
if [ "$IS_ARGO" = 'is_argo' ]; then
|
||||
# 如果原来没有 nginx 配置，需要获取 nginx 端口信息
|
||||
[ -z "$PORT_NGINX" ] && input_nginx_port
|
||||
until [ -n "$ARGO_RUNS" ]; do
|
||||
[ "$ARGO_READY" != 'argo_ready' ] && input_argo_auth is_add_protocols
|
||||
[ -n "$ARGO_RUNS" ] && local ARGO_READY=argo_ready && break
|
||||
@@ -2552,23 +2717,29 @@ change_protocols() {
|
||||
fi
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_VLESS_WS=${REINSTALL_PORTS[POSITION]}
|
||||
else
|
||||
unset PORT_VLESS_WS
|
||||
fi
|
||||
|
||||
# 如之前没有 ws，现新增的 ws，则输入 cdn
|
||||
[[ "${#CDN[@]}" = '0' && ( "$ARGO_READY" = 'argo_ready' || "$ORIGIN_READY" = 'origin_ready' ) ]] && input_cdn
|
||||
|
||||
# 获取原始 H2 + Reality 配置信息
|
||||
# 获取 H2 + Reality 端口
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_H2_REALITY=${REINSTALL_PORTS[POSITION]}
|
||||
else
|
||||
unset PORT_H2_REALITY
|
||||
fi
|
||||
|
||||
# 获取原始 gRPC + Reality 配置信息
|
||||
# 获取 gRPC + Reality 端口
|
||||
CHECK_PROTOCOLS=$(asc "$CHECK_PROTOCOLS" ++)
|
||||
if [[ "${INSTALL_PROTOCOLS[@]}" =~ "$CHECK_PROTOCOLS" ]]; then
|
||||
POSITION=$(awk -v target=$CHECK_PROTOCOLS '{ for(i=1; i<=NF; i++) if($i == target) { print i-1; break } }' <<< "${INSTALL_PROTOCOLS[*]}")
|
||||
PORT_GRPC_REALITY=${REINSTALL_PORTS[POSITION]}
|
||||
else
|
||||
PORT_GRPC_REALITY
|
||||
fi
|
||||
|
||||
# 停止 sing-box 服务
|
||||
@@ -2592,10 +2763,16 @@ change_protocols() {
|
||||
[ -s $WORK_DIR/tunnel.json ] && rm -f $WORK_DIR/tunnel.*
|
||||
fi
|
||||
|
||||
# 如有需要，删除 hysteria2 跳跃端口
|
||||
! ls $WORK_DIR/conf/*${NODE_TAG[1]}_inbounds.json >/dev/null 2>&1 && del_port_hopping_nat
|
||||
|
||||
# 如有需要，删除 nginx 配置文件
|
||||
! ls /etc/systemd/system/argo.service >/dev/null 2>&1 && [[ -s $WORK_DIR/nginx.conf && "$IS_SUB" = 'no_sub' ]] && IS_ARGO=no_argo && rm -f $WORK_DIR/nginx.conf
|
||||
|
||||
# 运行 sing-box
|
||||
cmd_systemctl enable sing-box
|
||||
|
||||
# 再次检测状态，运行 Sing-box
|
||||
# 再次检测状态，运行 sing-box
|
||||
check_install
|
||||
|
||||
check_sing-box_status
|
||||
@@ -2603,7 +2780,7 @@ change_protocols() {
|
||||
export_list
|
||||
}
|
||||
|
||||
# 卸载 Sing-box 全家桶
|
||||
# 卸载 sing-box 全家桶
|
||||
uninstall() {
|
||||
if [ -d $WORK_DIR ]; then
|
||||
[ -s /etc/systemd/system/argo.service ] && ( cmd_systemctl disable argo 2>/dev/null; rm -f /etc/systemd/system/argo.service )
|
||||
@@ -2615,6 +2792,7 @@ uninstall() {
|
||||
sleep 1
|
||||
[[ -s $WORK_DIR/nginx.conf && $(ps -ef | grep 'nginx' | wc -l) -le 1 ]] && reading "\n $(text 83) " REMOVE_NGINX
|
||||
[ "${REMOVE_NGINX,,}" = 'y' ] && ${PACKAGE_UNINSTALL[int]} nginx >/dev/null 2>&1
|
||||
[ "$IS_HOPPING" = 'is_hopping' ] && del_port_hopping_nat
|
||||
rm -rf $WORK_DIR $TEMP_DIR /etc/systemd/system/sing-box.service /usr/bin/sb
|
||||
info "\n $(text 16) \n"
|
||||
else
|
||||
@@ -2764,9 +2942,6 @@ ALL_PARAMETER=($(sed -E 's/(-c|-e|-C|-E) //; s/=([^"])/ \1/g; s/sudo cloudflared
|
||||
[[ "${#ALL_PARAMETER[@]}" > 13 && "${ALL_PARAMETER[@]^^}" == *"--LANGUAGE"* && "${ALL_PARAMETER[@]^^}" == *"--CHOOSE_PROTOCOLS"* && "${ALL_PARAMETER[@]^^}" == *"--START_PORT"* && "${ALL_PARAMETER[@]^^}" == *"--PORT_NGINX"* && "${ALL_PARAMETER[@]^^}" == *"--SERVER_IP"* && "${ALL_PARAMETER[@]^^}" == *"--UUID"* && "${ALL_PARAMETER[@]^^}" == *"--NODE_NAME"* ]] && NONINTERACTIVE_INSTALL=noninteractive_install
|
||||
|
||||
# 传参处理，无交互快速安装参数
|
||||
# 预设默认值
|
||||
IS_SUB=no_sub
|
||||
IS_ARGO=no_argo
|
||||
for z in ${!ALL_PARAMETER[@]}; do
|
||||
case "${ALL_PARAMETER[z]^^}" in
|
||||
-P )
|
||||
@@ -2845,6 +3020,10 @@ for z in ${!ALL_PARAMETER[@]}; do
|
||||
--ARGO_AUTH )
|
||||
((z++)); ARGO_AUTH=${ALL_PARAMETER[z]}
|
||||
;;
|
||||
--PORT_HOPPING_RANGE )
|
||||
((z++)); [[ "${ALL_PARAMETER[z]//:/-}" =~ ^[1-6][0-9]{4}-[1-6][0-9]{4}$ ]] && PORT_HOPPING_RANGE=${ALL_PARAMETER[z]//-/:} && PORT_HOPPING_START=${ALL_PARAMETER[z]%:*} && PORT_HOPPING_END=${ALL_PARAMETER[z]#*:}
|
||||
[[ "$PORT_HOPPING_START" < "$PORT_HOPPING_END" && "$PORT_HOPPING_START" -ge "$MIN_HOPPING_PORT" && "$PORT_HOPPING_END" -le "$MAX_HOPPING_PORT" ]] && IS_HOPPING=is_hopping
|
||||
;;
|
||||
esac
|
||||
done
|
||||
|
||||
@@ -2855,6 +3034,11 @@ check_dependencies
|
||||
check_system_ip
|
||||
check_install
|
||||
if [ "$NONINTERACTIVE_INSTALL" = 'noninteractive_install' ]; then
|
||||
# 预设默认值
|
||||
IS_SUB=${IS_SUB:-'no_sub'}
|
||||
IS_ARGO=${IS_ARGO:-'no_argo'}
|
||||
IS_HOPPING=${IS_HOPPING:-'no_hoppinng'}
|
||||
|
||||
install_sing-box
|
||||
export_list install
|
||||
create_shortcut
|
||||
|
||||
Reference in New Issue
Block a user